Final stages for F10

Unblocked after seat belts installation was done, I've started to put major components together. But first I've simulated heat shielding on the floor and rear suspension using bare metal foil. My silver sheet of foil is old and lost its adhesive abilities. I've used Gator acrylic glue to secure it in place. Attached exhausts to engine, then engine, gearbox and monocoque to floor. Next assembled rear wing in place. All the provided tabs and also rear wing supports allow for easy installation and assembly in place. Latest item assembled was front wing. I've used PE items from Studio27 set. I think it would be better to use items #8 in place of items #3 and vase verse. Still have 2 top winglets to attach. I'm rushing this build a bit in attempt to make it to local contest this Saturday. It will not be 100% completed by then, but I plan to return to it and finish up later.

F10 progress

More progress. Finished suspension by adding uprights and brakes. Photo with wheels is just a mock up again. I don't like Fujimi tires and hope to get replacement set from Tamiya RB6 kit. Finally got around to make seat belts. Not a big step, but took about 3 hours to complete and most importantly this unblocks me and I can put together floor, engine, gearbox, rear wing and monocoque. Finish is not too far, but there is still quite a bit to do. Have to put front wing together, complete tires and then attach all other smaller items.

Assembly started on F10

Usually as soon as all parts are painted and ready for final assembly, process accelerates quite a bit. Looks like I've reached that point with F10. I've clear coated last parts, where decals were placed - camera, brake calipers and wheels, and started final assembly steps. Assembled parts of rear and front suspension, attached oil tank to engine and radiators to monocoque. Simulated heat shielding on the rear of monocoque with Bare-Metal gold foil. More steps to come, but seat belts are a stumbling block at present. Seat belts and steering wheel detailing aren't least favorite tasks. Need to make those happen though, before I could mate all the sub-assemblies with the floor.

Below are photos of current sub-assemblies and quick mock up.

Little progress on F10

I've pretty much reached the point when I can start assembly steps for F10. Added some PE bits on the weekend. Fujimi didn't pay much attention to insides of radiators, but I think they could be visible at right angle and under right light. I have 2 sets of PE from Studio27 and Hobby Design. Both have meshes for radiators. I've removed plastic tabs from insides and put Hobby Design PE there. Studio27 PE went to outside. Also used HD PE rings to simulate brake rotors. Haven't figured out how to apply minimum glue and still be able to slide then into place. So, got quite a bit of glue marks and CA glue fogging. I use Tamiya fine polishing compound to remove fogging and some marks.

Mini review of Thunder Valley F1 1/12 scale “Formula Perfect” super kit for Ferrari 641/2

Apparently Thunder Valley F1 is back on track with Ferrari 641/2 detail kits and shipping them out to customers.

I've received my copy yesterday. Everything was packaged nicely and shipped on timely manner. Detail sets currently produced do not include turned parts for dumpers.

Overall impressions are positive. Spoiled by cheap and inexpensive photo-etch sets from China and Japan, I felt that there could be more PE parts for the price. But I guess it costs quite a bit more to produce those parts in USA. Besides, I understand that PE parts on rubber backing are even more expensive to make.

I especially like turned velocity stacks and cast in resin replacement air box base. All the turned parts look very good and their price to quality ratio is excellent for the money, in my opinion.

Wheel Nuts/Spindle set has to be ordered separately. Machined parts look very good to me. Again price to quality ratio is excellent for this set.

It is claimed on TVF1 site, that some of their detail sets provide more PE items compare to sets produced in the past under Perfect Parts brand. I've reviewed images I have of PP parts and beside washers and turned dumper's parts, I think TVF1 641/2 set covers pretty much same set of parts as PP set.

I have to wait till I actually build my 641/2 kit to make a conclusion on how much extra TVF1 set adds. But from visual review I think it looks to be a great value for the price and should add quite a bit of detail to the build of already excellent Tamiya kit.





Just for the sake of comparison I include a photo of PE sets provided in 1/12 scale MFH 643 conversion kit.

MP4/22 rescue build

There was another twist in the story of this model. Last November after returning from IPMS contest, I was placing models and trophies back into my glass cabinet. Somehow one of the heavy wooden trophies slipped behind from top shelf onto lower one and landed on MP4/22's rear wing. Rear right suspension and rear wing were damaged.




Fortunately damage was repairable. I've since re-applied CF decals to insides of wing end plates and put clear coat over them. Then reassembled rear suspension and finally put together rear wing last night. I've used different jig this time and managed to avoid formerly present gap between top horizontal planes. It's again not perfect, as end plates ended up not exactly parallel to each other, but it'll do for this build. I'm just happy to have this model back on the shelf in my cabinet. I love this car.

Decals applied to P34

Put pretty much all the decals on. Only small numbers from beside front wheels remain to apply. Will add PE items as needed and then it's off to final clear coat.